Our Iroko hardwood wall post with a decorative bead is specially designed for mounting on the interior of brick walls, pillars, or concrete posts. Iroko, known for its exceptional durability, naturally withstands the elements, ensuring its enduring presence for many years to come.
These posts have a width of 95mm and a thickness of 70mm, with a 70mm protrusion from the wall. They are available in various lengths, ranging from 930mm to 2430mm. If you require a specific length, you can choose the closest option and provide the exact measurement in the additional details section. Be assured that we will verify this before sending out your order.
The decorative bead extends 25mm deep and protrudes 30mm, effectively covering any gaps between the gate and the post. These gaps are essential for accommodating the expansion and movement of the gate.
The post will extend approximately 30mm above the gate, allowing for proper alignment between the interior of the post and the gate's height.
These posts are ideal for supporting gates with a width of up to 2.5m and a height of 2.6m.
To facilitate water drainage and enhance the post's longevity, its top features an angled design that effectively prevents water from accumulating.
Iroko Hardwood 95mm x 70mm Wall Post and Bead with Angled Top
£50.00
Size guide
Single gate:
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 45mm each)
- Take off 30mm (15mm either side) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 970mm
Take off 90mm for the posts: 880mm
Take off 30mm for movement and expansion: 850mm
Gate width required: 850mm
Single gate height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
Double Gates
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 70mm each)
- Take off 45mm (15mm gaps for either side and in the centre) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 3535mm
Take off 140mm for the posts: 3395mm
Take off 45mm for movement and expansion: 3350mm
Gates width required: 3350mm (gates tight together)
Double gates height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
Please select all options.
Our Iroko hardwood wall post with a decorative bead is specially designed for mounting on the interior of brick walls, pillars, or concrete posts. Iroko, known for its exceptional durability, naturally withstands the elements, ensuring its enduring presence for many years to come.
These posts have a width of 95mm and a thickness of 70mm, with a 70mm protrusion from the wall. They are available in various lengths, ranging from 930mm to 2430mm. If you require a specific length, you can choose the closest option and provide the exact measurement in the additional details section. Be assured that we will verify this before sending out your order.
The decorative bead extends 25mm deep and protrudes 30mm, effectively covering any gaps between the gate and the post. These gaps are essential for accommodating the expansion and movement of the gate.
The post will extend approximately 30mm above the gate, allowing for proper alignment between the interior of the post and the gate's height.
These posts are ideal for supporting gates with a width of up to 2.5m and a height of 2.6m.
To facilitate water drainage and enhance the post's longevity, its top features an angled design that effectively prevents water from accumulating.
Planting a new tree with every order!
Ecologi allow Stellar Gates to help combat deforestation by planting a new tree for every one of our orders. Trees are planted all over the world!
Also, see our sustainability page for details on our FSC certified materials.